PTFE Bulkhead Connector

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Bulkhead Union.

FAV is the manufacturer and Exporter of PTFE Compression Fittings and Valves. We also supply PTFE Tubes along with the fittings . One stop solution for your PTFE Requirements .FAV range of PTFE Fittings and PTFE Pipe Fittings are widely used due to unique characteristics of PTFE Material.

FAV PTFE Compression Fittings is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings .

We provide PTFE Fittings complete with PTFE Tubes . A COMPLETE PACKAGE !!

PTFE Tubes available in 1/16″ OD ,1/8″ OD ,1/4″ OD ,3/8″ OD & 1/2″ OD 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in 

  www.fav.net.in

PTFE Hex Adapter

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Hex Nipple, NPT x BSP.

FAV is the manufacturer and Exporter of PTFE Compression Fittings and Valves. We also supply PTFE Tubes along with the fittings . One stop solution for your PTFE Requirements .FAV range of PTFE Fittings and PTFE Pipe Fittings are widely used due to unique characteristics of PTFE Material.

FAV PTFE Compression Fittings is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings .

We provide PTFE Fittings complete with PTFE Tubes . A COMPLETE PACKAGE !!

PTFE Tubes available in 1/16″ OD ,1/8″ OD ,1/4″ OD ,3/8″ OD & 1/2″ OD 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in

 

  www.fav.net.in

PTFE Tube OD Connector, BSP

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Male Connector, OD x BSP.

FAV is the manufacturer and Exporter of PTFE Compression Fittings and Valves. We also supply PTFE Tubes along with the fittings . One stop solution for your PTFE Requirements .FAV range of PTFE Fittings and PTFE Pipe Fittings are widely used due to unique characteristics of PTFE Material.

FAV PTFE Compression Fittings is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings .

We provide PTFE Fittings complete with PTFE Tubes . A COMPLETE PACKAGE !!

PTFE Tubes available in 1/16″ OD ,1/8″ OD ,1/4″ OD ,3/8″ OD & 1/2″ OD 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in  

 

  www.fav.net.in

PTFE Male Connector Elbow

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Tube Elbow.

FAV is the manufacturer and Exporter of PTFE Compression Fittings and Valves. We also supply PTFE Tubes along with the fittings . One stop solution for your PTFE Requirements .FAV range of PTFE Fittings and PTFE Pipe Fittings are widely used due to unique characteristics of PTFE Material.

FAV PTFE Compression Fittings is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings .

We provide PTFE Fittings complete with PTFE Tubes . A COMPLETE PACKAGE !!

PTFE Tubes available in 1/16″ OD ,1/8″ OD ,1/4″ OD ,3/8″ OD & 1/2″ OD 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in 

  www.fav.net.in

PTFE Union

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Straight Union.

FAV is the manufacturer and Exporter of PTFE Compression Fittings and Valves. We also supply PTFE Tubes along with the fittings . One stop solution for your PTFE Requirements .FAV range of PTFE Fittings and PTFE Pipe Fittings are widely used due to unique characteristics of PTFE Material.

FAV PTFE Compression Fittings is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings .

We provide PTFE Fittings complete with PTFE Tubes . A COMPLETE PACKAGE !!

PTFE Tubes available in 1/16″ OD ,1/8″ OD ,1/4″ OD ,3/8″ OD & 1/2″ OD 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in 

  www.fav.net.in

PTFE Cap

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Cap & Plug.

PTFE Fitting (Polytetrafluoroethylene) a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE Fitting tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.

FAV PTFE Compression Tube Fitting is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings.

Polytetrafluoroethylene (PTFE), a strong, tough, waxy, nonflammable synthetic resin produced by the polymerization of tetrafluoroethylene. Known by such trademarks as Teflon, Fluon, Hostaflon, and Polyflon, PTFE is distinguished by its slippery surface, high melting point, and resistance to attack by almost all chemicals. The chemical resistance properties of PTFE  is so broad that its use is not recommended for only a limited list of chemicals. 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in  

 

  www.fav.net.in

PTFE Reducing Elbow

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Reducing Elbow.

PTFE Fitting (Polytetrafluoroethylene) a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE Fitting tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.

FAV PTFE Compression Tube Fitting is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings.

Polytetrafluoroethylene (PTFE), a strong, tough, waxy, nonflammable synthetic resin produced by the polymerization of tetrafluoroethylene. Known by such trademarks as Teflon, Fluon, Hostaflon, and Polyflon, PTFE is distinguished by its slippery surface, high melting point, and resistance to attack by almost all chemicals. The chemical resistance properties of PTFE  is so broad that its use is not recommended for only a limited list of chemicals. 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in  

 

  www.fav.net.in

PTFE Elbow Union

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Elbow Union.

PTFE Fitting (Polytetrafluoroethylene) a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE Fitting tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.

FAV PTFE Compression Tube Fitting is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings.

Polytetrafluoroethylene (PTFE), a strong, tough, waxy, nonflammable synthetic resin produced by the polymerization of tetrafluoroethylene. Known by such trademarks as Teflon, Fluon, Hostaflon, and Polyflon, PTFE is distinguished by its slippery surface, high melting point, and resistance to attack by almost all chemicals. The chemical resistance properties of PTFE  is so broad that its use is not recommended for only a limited list of chemicals. 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in 

  www.fav.net.in

PTFE Tube Union

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Tube Union.

PTFE Fitting (Polytetrafluoroethylene) a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE Fitting tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.

FAV PTFE Compression Tube Fitting is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings.

Polytetrafluoroethylene (PTFE), a strong, tough, waxy, nonflammable synthetic resin produced by the polymerization of tetrafluoroethylene. Known by such trademarks as Teflon, Fluon, Hostaflon, and Polyflon, PTFE is distinguished by its slippery surface, high melting point, and resistance to attack by almost all chemicals. The chemical resistance properties of PTFE  is so broad that its use is not recommended for only a limited list of chemicals. 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in  

 

  www.fav.net.in

PTFE Tube Tee

PTFE Fittings & Valves

We are the Manufacturer & Exporter of FAV PTFE Tee Fitting.

PTFE Fitting (Polytetrafluoroethylene) a fluorocarbon-based polymer is a resin supplied in powdered form, which is mixed, preformed, and extruded into a paste, and then finally tubing. PTFE Fitting tubing can be used in a large variety of applications due to its high chemical resistance, high and low temperature capability, resistance to weathering, electrical and thermal insulation, and lowest coefficient of friction of any solid material. The fittings are translucent white in Colour.

FAV PTFE Compression Tube Fitting is made from Single Ferrule Design .Since it is made from PTFE Bars it provides a much better performance then other molded ptfe fittings.

Polytetrafluoroethylene (PTFE), a strong, tough, waxy, nonflammable synthetic resin produced by the polymerization of tetrafluoroethylene. Known by such trademarks as Teflon, Fluon, Hostaflon, and Polyflon, PTFE is distinguished by its slippery surface, high melting point, and resistance to attack by almost all chemicals. The chemical resistance properties of PTFE  is so broad that its use is not recommended for only a limited list of chemicals. 

Pioneer Enterprise

Vatsalya B Co-Op Hsg Soc. Ltd.,33-33A Sant Savta Marg,

No.3 Ground Floor,Opp. Nariel Wadi,Mazgoan, Mumbai-400010, India

Tel: +91 22 23757188,+91 22 23757189

sales@fav.net.in, info@fav.net.in  

 

  www.fav.net.in